Nowadays, most of the materials of wind knives in the society are aluminum alloy air knives / wind knives or stainless steel air knives / wind knives. Aluminum alloy wind knives are electroplated in the manufacturing process, and their service life is much longer than other similar products. Stainless steel wind knives can be used in high temperature and high corrosion environments.
If you are not sure how to use and install air knife application, Then, the following points are well explained: The rational use of solid air knife installation technology is one of the core foundations of using air knife.
Regarding the installation and fixing method of the air knife, the following points need to be done:
1. According to the environmental design of the product or drying production line, confirm whether the air knife is installed horizontally or vertically (of course, there is also an inclined installation method).
2. Confirm the installation and fixing method of the air knife. Under normal circumstances, please use SCB air knife installation fixing bolts or air inlet for fixing.
3. When installing the air knife, the installation design of the air knife must be considered, and the angle can be adjusted arbitrarily, such as up, down, left, and right.
4. The adjustment of the air knife installation angle usually depends on the product to be blown. In most cases, install it at a position 75 degrees from the feed direction, and then confirm whether the pipe connection method has been confirmed.
5. If the blow-drying product is a beverage bottle, it is usually installed on the side. The incoming materials should be placed forward, low toward the front and high toward the back.
The main function of the air knife depends on the technology applied. Professional air knife manufacturers can provide the use and design of air knife systems. Otherwise, the corresponding air knife products will not achieve the expected results. Choosing SCB professional wind knife can bring you more results with half the effort
Working on a blow-off, drying or cooling problem?
Send us your application details and our engineers will recommend a system and give you a quotation within one working day.