-
1.The compressed air must be dry and oil-free, otherwise it will affect the life and performance of the annular air knife.
-
2.The 5-micron automatic drain air filter should be selected, and the 0.3-micron oil filter can be selected, and it should be installed as close to the product as possible.
-
3.Shorten the air source distance as much as possible. If it is far away, use G1/2 air pipe to connect, and use G1 air pipe for more than 30 meters.
-
4.The compressed air pressure should be 0.55-0.69Mpa.
-
5.If the air pressure flow and the blowing force decrease, the common problems are: the compressed air pipe diameter is too small, the air path is installed to limit the flow, the filter is blocked, etc
Working on a blow-off, drying or cooling problem?
Send us your application details and our engineers will recommend a system and give you a quotation within one working day.