Air knife system requirements:
1. The temperature of the transport medium is not higher than 40 °C.
2. The particle content in the medium does not exceed 100mg/m3, and the maximum power size is not more than half of the specified working clearance. If this requirement is not met, a filter dust removal device should be installed in the air knife system.
3. The pressure of the air knife system should not exceed the working pressure on the nameplate to avoid overloading the motor and burning the motor.
4. When the main fuel tank and the auxiliary fuel tank are filled with oil, the oil level is at the center of the oil mark (red dot). If you add too much oil, it will easily cause oil leakage at the fuel filler.
Working on a blow-off, drying or cooling problem?
Send us your application details and our engineers will recommend a system and give you a quotation within one working day.