Aluminium Alloy And Stainless Steel Super Air Blade Air Knife In Water Blow-Off & Drying Application

Product Details

The compressor super air blade air knife is a specially equipment used for industry blowing-off dust, liquid drying etc. It is designed by an air source, with a large flow, strong impact and uniform flow thin air curtain

Air blade air knife operating principle

Compressed air enters the high pressure chamber of the air knife through the air inlet (1) The airflow passes through the narrow, thin nozzle (2) to form a uniform air flow sheet in the length direction of the air knife. Since the compression ratio of the chamber (3) to the high-pressure air stream is 40:1, makes the air flow velocity loss is minimized and the pressure is maximum, let the air knife get a strong impact and minimal shear force sheet.

SCB Air blade air knife curtain diffusion

The smallest air flow will have when it is at the 0 position of the air knife outlet, because no ambient air is being flowed at this time, however the strength of the air curtain is the largest. As the distance becomes farther and farther, the strength of the air curtain gradually decreases, but the air volume gradually increases. The distance from the air outlet of the air knife to the surface of the product is usually 10~50mm.

Advantages:

1. Low noise

2. Save about 60% compressed air than conventional drilling duct curtains

3. Air flow is balance, air compression ratio up to 40:1 ratio

4. No moving parts, made of aluminum or stainless steel

5. small size, easy to install and maintenance-free

6. provides a variety of specifications of the air curtain width (100-1200mm), air flow intensity adjustable (with regulator)

7. Air knife can replace traditional fan and blowing pipe

Air blade air knife Dimension:

1. Material is Aluminium alloy or stainess steel

2. Length can be customized, smalest can be made 30mm, longest can be made 2000mm

3. Using with compressor

4. Please contact us to enquiry the details